Call or Text 314-894-1991

Recently Searched Clear History
Zoeller® 840-0008 2373452
  1. pin-int

Zoeller® 840-0008 2373452

Zoeller® Shark® Series G840 840-0008 Grinder Pump, 460 V, 5.5 A, 2 hp, 3450 rpm Speed, Iron, Powder-Coated Epoxy

  • Manufacturer: Zoeller Company
  • Brand Name: Zoeller®
  • Part Number: 2373452
  • MPN: 840-0008
  • UPC: 053514046286
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at ST LOUIS
  • loading Available at All Branches

The Shark Series 2 HP Model G840 Grinder Pump is designed to remove raw sewage in sewage lift stations or in low pressure sewer applications. This corrosion resistant pump will provide the dependability expected from a Zoeller pump. Backed by a 1-year warranty, every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right out of the box.

Zoeller® Grinder Pump, Series: Shark Series®, Model: G840, 460 V, 5.5 A, 60 Hz, 2 hp Rating, 3450 rpm Speed Rating, 59 gpm, 3 ph, 1-1/4 in Discharge, 130 deg F, 24-7/32 in H x 11-21/32 in W, 125 ft Maximum Feet of Head, Iron Impeller, Iron, Powder-Coated Epoxy

Amperage Rating      :      5.5 A
Amps      :      5.5
Cooling      :      Oil filled
Dimensions      :      24-7/32 in H x 11-21/32 in W
Discharge Size      :      1-1/4 in
Finish      :      Powder-Coated Epoxy
Flow Rate      :      59 gpm
Frequency Rating      :      60 Hz
HP Rating      :      2 hp
Impeller Material      :      Iron
Material      :      Iron
Maximum Feet of Head      :      125 ft
Model      :      Zll-model-840
Phase      :      3 ph
Series      :      Shark Series®
Ship Height      :      24.75
Ship Length      :      15
Ship Weight      :      132
Ship Width      :      12
Speed Rating      :      3450 rpm
Temperature Rating      :      130 deg F
Voltage Rating      :      460 V
  • The industry's only automatic, reversing grinder pump
  • 460 V grinder pump for sewage lift station applications
  • Oil filled motor and cast iron motor housing for optimal heat dissipation which prevents the pump from overheating
  • Non-automatic grinder pump requires the use of a control panel and control floats for the on/off operation
  • Proven Tri-Slice® cutter technology, three-independent cutting channels provide over 250000 cuts per minute
  • Powder-coated epoxy finish provides corrosion resistance and extends the life of the pump in harsh environments
  • Stainless steel screws, handle and hardware to prevent rust and corrosion over the life of the pump
  • 100% factory tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
  • Comes with a 1 year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product