Call or Text 314-894-1991
Zoeller® M75 75-0001 Sump Pump, 115 V, 5.6 A, 1/2 hp, 50 gpm, 25 ft Max Feet of Head, Engineered Plastic, Epoxy-Coated
Available at ST LOUIS
Available at All Branches
Our Model M75 Sump Pump is designed to remove unwanted groundwater in basement sump applications. The 1/2 HP Model 75 is an economical option when a higher pressure or flow sump pump is required. The Model 75 is compact, lightweight, economical, and backed by performance. Additionally, it is a fully automatic sump pump with a built-in float switch. So, it can be installed in minutes and depended upon for years. The Model 75's motor housing is constructed of cast iron to maximize heat dissipation. The cap, pump housing, and base are constructed of engineered plastic. This durable plastic allows the Model 75 to withstand a wide variety of basement sump conditions. The corrosion resistant engineered plastic vortex impeller has a smooth surface allowing water and solids to pass freely through the pump. Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.
Zoeller® Sump Pump, Model: M75, 115 V, 5.6 A, 60 Hz, 1/2 hp, 3450 rpm, 50 gpm Flow Rate, 1 ph, 1-1/2 in Discharge, 10 ft Cord Length, Shut-Off Head: 25 ft, Maximum Feet of Head: 25 ft, Ball Bearing, 104 deg F, Engineered Plastic Impeller, Engineered Plastic, 12-3/8 in H, Finish: Epoxy-Coated
| Amperage Rating | : | 5.6 A |
| Bearing Type | : | Ball |
| Cord Length | : | 10 ft |
| Dimensions | : | 12-3/8 in H |
| Discharge Size | : | 1-1/2 in |
| Finish | : | Epoxy-Coated |
| Flow Rate | : | 50 gpm |
| Frequency Rating | : | 60 Hz |
| HP Rating | : | 1/2 hp |
| Impeller Material | : | Engineered Plastic |
| Material | : | Engineered Plastic |
| Maximum Feet of Head | : | 25 ft |
| Model | : | M75 |
| Phase | : | 1 ph |
| Shut-Off Head | : | 25 ft |
| Speed Rating | : | 3450 rpm |
| Temperature Rating | : | 104 deg F |
| Voltage Rating | : | 115 V |